Service Registration is Missing or Corrupt – Fixed

0
404

When you attempt to perform a Windows update on your machine, it is conceivable that it will fail to install the updates and enter an error state.

This troubleshooter may, however, fail to resolve some issues, such as the Service Registration is missing or corrupt error.

How Do I Fix A Missing Or Corrupt Service Registration?

In this article, we have quickly discussed all of the ways for fixing this problem. Follow the steps carefully and try each remedy until the issue is resolved.

 1. Verify Windows Update

Before attempting more difficult approaches to resolve this issue, you should first try the simplest, which involves checking whether the Windows Update services are properly launched and working.

This issue can also happen if the update services aren’t working properly. Follow the actions outlined below to see if this is the case.

Step 1: To open the run command window, press the Windows logo key + R at the same time.

Step 2: Now type services.msc into the box and hit Enter. This will run the service’s utility, which will display a list of all the services available on your machine.

Step 3: Once the services list has loaded, seek for the Windows Update service, right-click it, and choose Properties from the expanded list.

Step 4: Go to the General page, then click the arrow next to the Startup type option to bring up a dropdown menu, from which you may choose Automatic open.

Step 5: In the same window, under the section Service status, click the Start button and then Apply to save the changes, then close the Properties window.

Step 6: Once you’ve changed the properties of the Windows Update service, repeat the same for the Background Intelligent Transfer Service and the Cryptographic service in the same service list.

After that, restart your computer to allow the modifications to take effect. Check to see if you have a stable internet connection. Now try to access Windows Update again to see if the problem has been addressed.

 2. Using Command Prompt to Execute Instructions

If the above technique didn’t work for you, try typing these commands into your system’s command prompt to see if the problem is fixed.

Before restoring your Windows or altering the registry, we’ll try to fix this mistake by resetting the settings and configurations. To do so, follow the steps outlined below.

Step 1: First, use the Search bar to look for the Command Prompt option in your system.

Step 2: From the list of results, find Command Prompt and right-click it, then choose Run as Administrator from the right-click menu.

Step 3: Now, one by one, input the commands listed below, pressing enter after each one.

wuauserv wuauserv wuauserv wuauserv

cryptSvc should be stopped on the network.

halt bits on the internet

net msiserver halt

C:Windows/ren/ren/ren/ren/ren/ren/ren/ren/ren

SoftwareDistribution SoftwareDistribution.old

C:WindowsSystem32catroot2 Catroot2.old ren C:WindowsSystem32catroot2 Catroot2.old

Step 4: Restart the computer.

Step 5: After the system has been restarted, open the Command prompt window again and type the following commands, pressing enter after each one.

wuauserv wuauserv wuauserv wuauserv

start cryptSvc.net

start bits on the internet

start msiserver with net

Step 6: Remain patient until all of the processes have completed satisfactorily.

Open Windows Update once more to see if the problem has been repaired. If that doesn’t work, move on to the next option.

3. Refreshing your.NET Files 

As we all know,.NET files are at the heart of the system, and without them, the majority of actions will fail.

In this procedure, we will manually update these.NET files to see if the problem has been resolved. Follow the steps outlined below to carry out this method.

Step 1: To open the run command window, press the Windows logo key + R at the same time.

Step 2: Now type the control panel into the box and hit Enter.

Step 3: When the control panel appears, go to the bottom left side of the window and select Programs.

Step 4: After Programs has opened, go to the Programs and Features area and click the Turn Windows features on or off option.

Step 5: A list of all the apps and features in your system will now appear, which may take some time to load.

Step 6: Once the programme is open, uncheck all of the checkboxes that contain the word ‘.NET.’ Because all of the.NET files will be uninstalled during this process, it may take some time.

Step 7: To save the changes, click the Okay button.

Step 8: Reopen the list and check all of the.NET files checkboxes that were previously unchecked.

Step 9: Your system will now attempt to reinstall the framework that was previously uninstalled. It’s possible that this procedure will take some time.

Restart your computer to see if the issue has been resolved. If not, move on to the next method.

 4. Remove Your Antivirus Software

This strategy may work for you if all of the previous options failed to solve your problem. Antivirus software on your computer might sometimes cause problems with your operating system.

Because of its outdated virus definitions, antivirus software may tamper with your vital files. As a result, it’s conceivable that your antivirus software isn’t up to date, producing a clash with the Windows Update process.

During this procedure, we will uninstall or temporarily disable your antivirus software and check whether Windows Update is functioning properly. To do so, follow the steps outlined below.

Step 1: To launch the run command window, press the Windows logo key + R at the same time.

Step 2: Now type control panel into the box and hit Enter.

Step 3: When the control panel appears, go to the Programs area on the bottom left side of the window and select Uninstall a Program.

Step 4: A list of all the programmes installed on your system will now appear; search the list for the name of your antivirus.

Step 5: Select Uninstall from the context menu by right-clicking on it.

Step 6: Once the removal is complete, restart your computer to see if the problem has been repaired.

Note: You do it at your own risk while uninstalling antivirus software from your computer. We advise you not to download any executables from the internet or connect any USB devices while your antivirus isn’t installed. If Windows Update still doesn’t work for you, reinstall your antivirus.

5. SFC Scan

System File Checker (SFC) is a built-in programme in Windows that can analyse your system for corrupt and damaged files and then fix them if they are missing or corrupted.

Since Windows 98, this utility has been included in the operating system. This is a fantastic programme for repairing and inspecting your computer for faulty files. When you run an SFC scan, you will receive one of three responses.

  • There were no integrity violations discovered by Windows.
  • Windows Resource Protection identified and repaired corrupt files.
  • Although Windows Resource Protection discovered faulty files, it was unable to repair some (or all) of them.

To run an SFC scan on your machine, follow these steps.

Step 1: First, use the Search bar to look for the Command Prompt option in your system.

Step 2: From the list of results, find Command Prompt and right-click it, then choose Run as Administrator from the right-click menu.

Step 3: In the command prompt window, type sfc /scannow and then click Enter.

Step 4: After the repair is complete, restart your computer to see if the error has been repaired.

If an error is found, it will be repaired following the manner described above. After that, restart your computer to see if Windows Update is functioning properly.

 6. Firewall

Finally, we may try turning off the Firewall and seeing if the Windows Update issue is rectified. Windows Firewall keeps track of your system’s incoming and outgoing internet data and packets.

On the basis of its criteria, it also excludes specific apps and connections from the installation. To disable your system’s Windows Firewall, follow the procedures outlined below.

Step 1: To open the run command window, press the Windows logo key + R at the same time.

Step 2: Now type control panel into the box and hit Enter.

Step 3: When the control panel appears, click the search tab in the top right corner of the window and type Firewall.

Step 4: From the list of options, select Windows Defender Firewall.

Step 5: On the left side of the window, select Turn Windows Firewall on or off.

Step 6: On the Public and Private Networks tabs, select the Turn off Windows Firewall option. The modifications you’ve made will be saved, and then you’ll be able to exit. Restart your computer to see if the issue has been resolved.

Conclusion

We hope the answers in this post were helpful in resolving the Service Registration is missing or corrupt error. If you have any more questions or concerns, please leave a comment below.

LEAVE A REPLY

Please enter your comment!
Please enter your name here