How To Fix PS4 Controller Not Charging Error


PS4 controllers are wirelessly connected to your Play Station system. They may be charged by a variety of devices, including laptops, computers, and smartphone chargers, as well as the console itself.

However, several users have complained that their PS4 controller is not charging properly. We’ve covered all of the possible causes of this problem in this post, as well as how to successfully troubleshoot it.

What Is The Cause of The PS4 Controller

There are a variety of reasons why your PS4 controller is not charging properly, just like any other wireless device or controller. Some of them are listed below.

Error status: It’s possible that your PS4 controller is stuck in an error condition, preventing it from charging properly.
The PS4 console’s charging port, as well as the controller’s charging port, may be broken.
Charging cord: It’s possible that the charging cable you’re using to charge the controller is damaged or isn’t giving the necessary amount of charge.

Batteries: Just like any other rechargeable battery, the battery in your console will eventually run out. Because each battery has a limited lifespan. If you haven’t replaced your battery in a long time, this could be the cause of your problem.

The PS4 Controller Isn’t Charging Error Can Be Fixed in 12 Different Ways

Before attempting any of the above remedies, make sure your PS4 controller is not physically broken, and if it is, take it to a store to get it checked. Also, double-check that all of the PS4’s connections are secure. In this article, we have simply outlined all of the solutions. To solve this problem, try each one one at a time.

1. Reset Your PlayStation 4 

Simple ways should be tried first before moving on to more difficult ones, such as tampering with the controller’s batteries and cables. The settings and setups of the PS4 controller will be reset in this solution.

Typically, the PS4 controller has default settings, which are the settings and configuration that most gamers choose. Follow these procedures to reset your controller.

Step 1: Make sure your PS4 controller is not plugged into any charging ports or linked to any console.

Step 2: Now turn your controller around and look at the back for the reset button.

Step 3: Once you’ve located the reset button, press it with a small pin or toothpick and hold it for a few seconds before releasing it.

Try charging your controller again after a few seconds to check whether the problem has been addressed.

2. Perform a PS4 Power Cycle

If the previous approach didn’t work for your PS4 controller, it’s possible that the problem is with your PS4 console, which is preventing your controller from charging properly.

Many people have claimed that power cycling the PS4 console helped them repair it. The console is entirely restarted upon power cycling, and all previous temporary configurations and settings are wiped. The steps to power cycling are as follows.

Step 1: Normally turn off both your PS4 controller and the system.

Step 2: Remove the main power supply wire from the console’s socket and set it aside for 5 to 10 minutes.

Step 3: To completely deplete the PS4 console’s energy, press and hold the PS4 power button for around 30 seconds.

Step 4: Reconnect everything and switch on the console and controller once some time has passed.

Now check to see if the PS4 controller is charging. If not, move on to the next step.

3. Examining the Connecting Wire

One of the most typical causes of this problem, as we noted previously, is a damaged charging cord. PS4 is charged through a connecting wire, commonly known as a USB cable, much like any other electrical device. And, after a lengthy period of use, this connection cable may stop working owing to physical deterioration.

To see if the connecting cable is damaged, try changing it with any other USB cable that is still in good working order, such as your phone charger. If the PS4 is still not charging, we recommend that you replace the connected wire. If the problem isn’t with the connecting cable, move on to the next step.

4. Verify the PS4 Charging Port

A faulty charging port is another common source of this problem after the bad connecting wire. You’ve been attempting to charge your PS4 controller using the console up until now.

Now, try charging it using a different port, such as your phone or a laptop charging adapter, as the console’s damaged charging port could be the source of the problem. If you can charge it through another charging port, the problem is with your console. You can test it by charging your PS4 controller with a different PS4.

If your charging port is malfunctioning, we recommend having it checked by a professional. Do not attempt to solve the problem on your own.

5. PS4 Battery Replacement

If none of the aforementioned alternatives worked for you, it may be time to change your PS4 batteries. The PS4 battery, like any other primary battery, can be drained with time, which could be the cause of this problem.

Ensure that the battery you purchase meets the same standards as the previous one; otherwise, your hardware system may be physically damaged. If you’re having difficulties replacing the PS4 battery, look up ‘how to change the PS4 battery’ on YouTube and follow the directions carefully.

6. Check AC Voltage

The issue does not have to be caused by hardware or batteries. It’s quite likely that this problem is caused by voltage changes in your neighbourhood.

We recommend that you use a multimeter to verify the power rating in your area, as there’s a chance that your PS4 isn’t receiving enough current or voltage while charging. If you’re experiencing voltage swings in your neighbourhood, wait until the power rating returns to normal.

Make sure your PS4 charger has the proper power rating of 120/240W. If you don’t know how to use a digital multimeter to measure AC voltage, we recommend finding and watching YouTube tutorials on the subject and carefully following the instructions outlined.

7. Examine the Charging Port on the Controller

It’s possible that the problem isn’t with the console or USB cable, but with the charging port on the PS4 controller itself, and that you’ll need to replace your controller.

Connecting another controller to your PS4 charging port with the same USB cord that you used to charge your previous PS4 controller is a simple way to check this. Check to see if the PS4 controller is charged.

If the other PS4 controller charges successfully, the problem is with the controller’s charging port, not with any other component. You can try some of the options listed below.

If they don’t work for you, you’ll need to contact Customer Support Service since you may need to replace the charging port on your controller. If they are unable to assist you, you may need to purchase a new PS4 controller for yourself.

8. Keep the Charging Port Clean

If the procedures listed above haven’t helped you with the controller, it’s time to look at the controller’s charging port. Now try to plug the USB cable in and observe if it fits snugly or is a little loose.

The dangling cable indicates that the port has been damaged. Remove the cable to examine if there is any dust accumulation or anything else that could be causing the issue. If there is a port, you must clean it out. You can do this by yourself, but exercise caution and avoid damaging the controller.

What is the best way to clean the charging port?

Cleaning the charging port should be done with extreme caution because the charging port is a highly fragile part of the controller, and the charging pin on it can easily be broken. To gently remove the dust accumulation from the charging port of the PS4 controller, follow the instructions outlined below.

Step 1: Make sure the PS4 controller is turned off before beginning this step.

Step 2: Hold a can filled with pressurised air that has a nozzle or straw a few inches away from the charging port.

Step 3: Blast the port with a few brief bursts of air to clear any loose dirt or accumulation.

Step 4: Using a microfiber cloth, wipe away any leftover dust around the charging port.

Step 5: Gently clean the inside of the charging port with a little damp paper towel wrapped around a toothpick.

Step 6: Allow the controller to dry for a few minutes.

Step 7: Finally, make sure the USB cable is completely dry before plugging it back in the port.

Check to see if the controller has begun charging. If this solution doesn’t work, try the next one.

9. Charge

It’s also possible that the controller’s inability to charge is due to the PS4, in which case the PS4 is unable to provide the necessary amount of charging to the controller.

Your controller can be plugged into any laptop, PC, or power bank that has a USB port. Make sure the device to which you’ve attached the PS4 controller is of good quality, as it may become heated if it isn’t. Check whether your controller is being charged after it has been connected to the charging equipment.

10. Remove the PS4 

It is critical to ensure that when charging your PS4 controller, it does not sit on a hot surface or any other device that is in use and could become heated at any time, as this could be the cause of your controller not charging.

Because the PS4’s sensors are on the backside of the controller and each component is connected by a wire, the controller can quickly melt if it is placed on a hot surface. So keep this in mind as you charge your PS4, and if this isn’t the case, move on to the next option.

11. Turn Your PS4 Controller 

One of the most well-known, but also strange, solutions we’ve come across is to charge your PS4 controller by turning it upside down. As weird as it may sound, it appeared to work for some users. It has to do with the fact that the charging connector on your PS4 controller only accepts electricity at a certain angle.

Why this occurs in certain of the controllers is still unknown. So, turn your PS4 controller upside down and attach it to the charger to check whether it begins to charge. If this choice doesn’t work for you, move on to the final option.

12. Purchase a PlayStation 4 

If your PS4 controller isn’t charging, it’s possible that the problem is with your USB cord, as we previously discussed. In this scenario, we suggest purchasing a new PS4 charging station.

There will be no need to seek for a USB cable with the PS4 charging station because the PS4 controller may be charged through the controller ports. It will cost around $15-$25, making it a far more cost-effective and better choice than purchasing a new controller.


We hope the above-mentioned 12 solutions to the PS4 Controller not charging problem were helpful. All of these treatments should be applied with caution, as the controller is easily damaged. If you have any further recommendations or questions, please leave them in the box below.


Please enter your comment!
Please enter your name here